Requirements: C.H.I.P configured as: http://anonit.blogspot.com.au/2016/08/installing-chip-headless.html, with a static IP address
Type the command
sudo cp /etc/resolv.conf resolv.conf.bak
sudo nano /etc/resolv.conf
Edit the nameserver to have the DNS forwader settings of your choice.
Save and Exit Nano.
Install curl using the command
sudo apt-get –y install curl
Download and install pi-hole:
wget –O basic-install.sh https://install.pi-hole.net
chmod +x basic-install.sh
./basic-install.sh
Press OK
You should donate (I did!). Press OK
Chose wlan0 and press OK (wlan1 is bluetooth)
Choose IPv4, IPv6 or both and press OK
If the IP address is correct, select YES
If the IP address you have assigned the CHIP is within the DHCP range of your DHCP Server or router, you may need to exclude this IP address, or modify the range.
Click OK
Select the DNS servers to use as forwarders. If you are not sure, choose Google, and select OK.
Once the install is complete, press OK
You can add additional block lists by doing the following:
sudo cp /etc/pihole/adlists.default /etc/pihole/adlists.list
sudo nano /etc/pihole/adlists.list
Add the bottom to the file (or add your own)
##############
# Additional #
##############
#easylist
https://easylist.to/easylist/easylist.txt
https://easylist-downloads.adblockplus.org/easyprivacy.txt
#malwaredomains
http://www.malwaredomainlist.com/hostslist/hosts.txt
http://mirror1.malwaredomains.com/files/justdomains
#Peter Lowes Ad Server List
https://pgl.yoyo.org/adservers/serverlist.php?hostformat=hosts&showintro=1&mimetype=plaintext
#Ublock Filters
https://github.com/gorhill/uBlock/blob/master/assets/ublock/filters.txt
https://github.com/gorhill/uBlock/blob/master/assets/ublock/badware.txt
https://github.com/gorhill/uBlock/blob/master/assets/ublock/privacy.txt
https://github.com/gorhill/uBlock/blob/master/assets/ublock/unbreak.txt
Reboot the chip with
sudo reboot
Change the DNS on your computer / or router to point to the IP address of the chip. In a Window DNS environment, change the DNS forwarders
You can check the status and modify the blocklist / whitelist by navigating to:
http://nnn.nnn.nnn.nnn/admin/
References:
https://github.com/pi-hole/pi-hole
http://jacobsalmela.com/network-wide-hardware-ad-blocking-9-chip-hole/